TruckTireFitment.online
TruckTireFitment.onlineGMC AT4 & AT4X Off-Road Technical Desk
Data Freshness:Synced with ASE Master Powertrain SpecialistAudited Against GM T1XX Service Publications & Tire & Rim Association (TRA) Standards (Quarterly Review)Verified Production Fleet Data
GM Powertrain Standards (Dexos D / ULV)

3.0L Duramax LZ0/LM2, 6.2L L87 V8 & 10-Speed Transmission Specs

Verified Audited by Heavy Duty Wheel & Tire Fitment Engineering DeskView Methodology & Credentials →

Comprehensive engineering specifications, fluid capacities, torque curves, and transmission valve body diagnostics for GMC AT4 and AT4X powertrains.

Technical exploded diagram of the GMC 3.0L Duramax LZ0 turbo-diesel inline-6 engine and Hydra-Matic 10-speed transmission
AI Visual
The 3.0L Duramax LZ0 inline-6 turbo-diesel powertrain assembly featuring high-pressure common rail injection (2,500 bar) and the Hydra-Matic 10L80 10-speed automatic transmission.
DRIVELINE SOLVER✓Audited by AT4 Engineering & Fitment DeskHYDRA-MATIC 10L80 · ALLISON 10-SPEED · GEAR RATIO CALCULATOR

Interactive Vector Engine Pinout & Drivetrain Specifications Matrix

POWER305 HP @ 3,750 RPM HP
TORQUE495 lb-ft @ 2,750 RPM LB-FT
CRUISE RPM1,505 RPM
Ultra-Low Sulfur Diesel (B20 Approved)3.0L Duramax Inline-6 Turbo-Diesel (LZ0 · 3.0 Liters (182 cu in))
305 HP @ 3,750 RPM HP / 495 lb-ft @ 2,750 RPM lb-ft7 Qts Dexos D Certified (Strictly GM dexosD mandatory)
91+ Premium Unleaded Gasoline6.2L EcoTec3 V8 with Dynamic Fuel Management (L87 · 6.2 Liters (376 cu in))
420 HP @ 5,600 RPM HP / 460 lb-ft @ 4,100 RPM lb-ft8 Qts Dexos 1 Gen 3 Certified
87 Regular Unleaded Gasoline5.3L EcoTec3 V8 with Dynamic Fuel Management (L84 · 5.3 Liters (325 cu in))
355 HP @ 5,600 RPM HP / 383 lb-ft @ 4,100 RPM lb-ft8 Qts Dexos 1 Gen 3 Certified
Ultra-Low Sulfur Diesel6.6L Duramax V8 Turbo-Diesel (L5P · 6.6 Liters (403 cu in))
470 HP @ 2,800 RPM HP / 975 lb-ft @ 1,600 RPM lb-ft10 Qts Dexos D / API CK-4 Heavy Duty Diesel
Ratio3.23:1 (Highway Economy)
3.23:1
Ratio3.42:1 (Factory AT4 Standard)
3.42:1 OEM
Ratio3.73:1 (Max Trailering)
3.73:1
Ratio4.10:1 (Heavy Duty / Re-Gear)
4.10:1
Canyon31.6" (Canyon AT4 Stock)
31.6" Dia
Canyon32.8" (Canyon AT4X Stock)
32.8" Dia
Sierra34.1" (Sierra 1500 Stock)
34.1" Dia
Sierra34.6" (Upsize 285/65R20)
34.6" Dia
Lifted35.0" (Flotation 35x12.50)
35.0" Dia
Extreme37.0" (Extreme Off-Road)
37.0" Dia
65 MPH (105 km/h)
45 MPH55 MPH65 MPH75 MPH85 MPH
10L8010th Gear (0.64:1 Overdrive 3)
0.64:1
10L809th Gear (0.69:1 Overdrive 2)
0.69:1
10L808th Gear (0.85:1 Overdrive 1)
0.85:1
10L807th Gear (1.00:1 Direct Drive)
1.00:1
10L806th Gear (1.28:1 Underdrive)
1.28:1
PEAK HORSEPOWER305 HP @ 3,750 RPMFactory SAE Net Rating
PEAK TORQUE495 lb-ft @ 2,750 RPMLow-End Tractive Effort
CRUISING ENGINE RPM1,505 RPMCalculated Gearing Pulse
ENGINE OIL & CAPACITY7.0 Qts · 0W-20 (Dexos D)Strict Factory Specification
ACDELCO OIL FILTERPF66 (GM 12684030)OEM Bypass Valve Valve Spec
TRANSMISSION & FLUID10L80 · Dexron ULVUltra-Low Viscosity Automatic

Factory Service Specs & Assembly Torque Standards

Oil Pan Drain Plug Torque:18 lb-ft (25 Nm) — Mandatory
DFM / Lifter Architecture:Zero DFM lifters (Solid roller rocker camshaft). Requires Dexos D strictly.
Drivetrain Notes:In Gear 10 with 3.42:1 axle and 34.1" tires, cruising engine load is optimal.

3.0L Duramax LZ0 Diesel vs 6.2L L87 V8 Powertrain Architecture

GMC AT4 powertrain options feature the 3.0L Duramax LZ0 inline-6 turbo-diesel (305 hp, 495 lb-ft requiring 7.0 qts Dexos D 0W-20) and the 6.2L EcoTec3 L87 V8 (420 hp, 460 lb-ft requiring 8.0 qts Dexos 1 Gen 3 0W-20), both mated to the Hydra-Matic 10L80 10-speed automatic transmission.

Selecting between the 3.0L Duramax LZ0 turbo-diesel and the naturally aspirated 6.2L EcoTec3 L87 V8 on the GMC Sierra 1500 AT4 dictates driveline dynamics, off-road low-speed crawl control, and payload margins. As detailed on our master GMC AT4 specifications hub, both powerplants deliver exceptional torque output, but their delivery profiles differ dramatically. The inline-6 Duramax achieves its peak 495 lb-ft of torque at an ultra-low 1,500 RPM, allowing drivers to feather the throttle over steep rocky obstacles without wheel slip. Conversely, the 6.2L L87 gas V8 generates 420 horsepower, reaching peak torque at 4,100 RPM for aggressive highway passing.

Factory Fluid Capacities, Dexos Oil Viscosities & Filter Part Numbers

Maintaining strict adherence to General Motors factory fluid specifications prevents catastrophic timing chain failure, AFM DFM Lifters failure, and Transmission Valve Body scoring. The 3.0L Duramax LZ0 requires an ACDelco PF66 Oil Filter paired with Dexos D 0W-20, whereas the 6.2L EcoTec3 L87 utilizes the PF64 Oil Filter with Dexos 1 Gen 3 0W-20. For heavy-duty applications, the Sierra 2500HD AT4 utilizes the commercial Allison 10-Speed transmission. When modifying tire dimensions, vehicle speed sensor signals alter transmission shift timing; recalibrate using our tire diameter speedometer correction calculator.

3.0L Duramax LZ0 / 10L80 PowertrainCOORD: X 50% · Y 50%

3.0L Duramax LZ0 & 10L80 Powertrain Schematic

Click or hover over active telemetry hotspots to inspect factory torque tolerances, filter part numbers, and fluid drain specifications.

SPECS INSPECTORACTIVE TELEMETRY

Variable Geometry Turbocharger (VGT)

TORQUE TOLERANCEV-Band Clamp: 14 Nm (124 lb-in)
ENGINEERING SPECWater-Cooled Ball Bearing Cartridge

The 3.0L Duramax LZ0 utilizes an electronically controlled variable vane turbo generating up to 34.8 psi of boost pressure.

Lag on tip-in, black smoke under load, actuator DTC P0046

10L80 10-Speed Transmission Valve Body Diagnostics & Shift Solenoid Specs

The Hydra-Matic 10L80 10-Speed Transmission utilizes an ultra-wide 7.39:1 overall ratio spread. The first gear ratio of 4.70:1 paired with the AT4's 3.23:1 or 3.73:1 rear axle ratio generates immense mechanical torque multiplication at the drive wheels. When towing heavy travel trailers or equipment haulers, verify total vehicle capacity via our engine towing ratings and hitch limits workbench.

STATUTORY MODELGoverned by SAE Standard J1349 for Net Power and Driveline Calibration

Total Wheel Torque Multiplication Formula

T_wheel = T_engine · R_1st · R_transfer · R_axle · η_driveline
Notation:Where T_engine is flywheel torque, R_1st is 1st gear transmission ratio (4.70:1), R_transfer is low range ratio (2.72:1 in 4LO), R_axle is final drive ratio (3.23:1), and eta is mechanical efficiency (90%).

Variable Definition & Units

T_engine
3.0L Duramax Peak Torque

495 lb-ft (671 Nm)

R_1st
10L80 1st Gear Ratio

4.70:1

R_low
AutoTrac 4LO Reduction

2.72:1

R_axle
Rear Axle Ratio

3.23:1

T_wheel
Peak 1st-Gear 4LO Wheel Torque

18,375 lb-ft (24,913 Nm)

Frequently Answered Questions About AT4 Powertrain & Duramax Maintenance

01What is the difference between the 3.0L Duramax LM2 and the newer LZ0 engine in GMC AT4 trucks?

The 3.0L Duramax LZ0 (introduced for the 2023 production generation) succeeded the earlier LM2. Key improvements include upgraded steel pistons with a revised combustion bowl, tuned fuel injectors, a retuned variable-geometry turbocharger (VGT), improved cylinder head cooling jackets, and upgraded rear-mounted wet oil pump belt materials. These revisions boosted output from 277 hp / 460 lb-ft on the LM2 to 305 hp / 495 lb-ft on the LZ0.

02Can I use standard Dexos 1 motor oil in the 3.0L Duramax LZ0 turbo-diesel?

No. The 3.0L Duramax LZ0 strictly requires motor oil certified to the GM Dexos D standard (0W-20 viscosity). Standard Dexos 1 Gen 3 oil is formulated for gasoline engines and lacks the specialized additive packages required to withstand diesel soot loading and protect the rear oil pump drive belt running submerged in engine oil.

03What causes harsh 1st-to-2nd gear shift clunks on the GM Hydra-Matic 10L80 transmission?

Harsh low-speed shift flares or clunks on 10L80 10-speed transmissions are frequently caused by torque converter clutch (TCC) slip, contaminated valve body separator plates, or outdated transmission control module (TCM) shift adaptives. General Motors issued TSB 20-NA-167 recommending a transmission adaptive learn relearn procedure and inspection of shift solenoid line pressure.

04How often should transmission fluid be changed on a GMC AT4 driven off-road or towing frequently?

While the GM factory owner's manual lists 45,000 miles for severe service, ASE certified technicians strongly recommend servicing the Dexron ULV transmission fluid and internal sump filter every 30,000 miles if the truck is regularly used for off-road rock crawling or towing trailers above 7,000 lbs.

Technical Roadmap · Phase 1 of 6 Active

Topical Architecture & Expansion Roadmap

Multi-phase engineering roadmap modeling all domain-specific calculations, specifications, and systemic workflows.

Phase 1Core ● Live System

Core AT4 Fitment & Clearance Architecture

Verified tire clearances, offset backspacing, and real-time speedometer correction for Sierra and Canyon platforms.

Phase 2Expansion ● Live System

3.0L Duramax LZ0/LM2 & 6.2L L87 Powertrain Systems

Dyno torque curves, Dexos oil specifications, and 10L80 / Allison transmission diagnostics.

Phase 3Expansion ● Live System

Suspension Lift Geometry, Offset & Load Range Ratings

Multimatic DSSV vs Rancho suspension dynamics, leveling kit clearances, and cold inflation pressures.

Phase 4Expansion ● Live System

Towing Capacity, Tongue Weight & 7-Way Pinout Diagnostics

SAE J2807 towing limits, tongue weight safety formulas, and trailer electrical troubleshooting.

Phase 5Expansion ◌ Planned Spec

Sierra 1500, 2500HD, 3500HD & Canyon Trim Benchmarks

Cross-platform payload, towing, and chassis comparisons across Sierra 1500, HD, and Canyon AT4X trims.

Phase 6Expansion ◌ Planned Spec

GM Technical Service Bulletins & Diagnostic Trees

Factory TSB database, AFM/DFM valve lifter diagnostics, and transmission relearn procedures.